San Fernando
Electrician
You Can Trust
LED Guys is a licensed C10 electrical contractor serving San Fernando's 1940s–1960s residential neighborhoods, post-war strip malls, and the light-industrial corridor along San Fernando Road in ZIP codes 91340 and 91341.
Panel inspections, upgrades & replacements (60A → 100A → 200A → 400A), EV charger installation, recessed LED retrofit, ADU electrical, and 24/7 emergency service — all permitted through the City of San Fernando Building & Safety Division.
Licensed Electrician Serving San Fernando, CA
San Fernando's housing stock — built predominantly between the 1940s and 1960s as post-WWII suburban sprawl exploded across the north Valley — means most homes in ZIP codes 91340 and 91341 are running on 60A to 100A service panels that were never engineered for today's electrical demands. LED Guys encounters this profile on every San Fernando job: burnt lug connections from decades of thermal cycling, double-tapped breakers feeding multiple circuits from a single slot, and aluminum branch circuit wiring in homes built before 1972 that needs remediation before any new load can be added. Hablamos Español — Jorge and the crew are fully bilingual.
The most frequent residential calls come from the dense single-family blocks off Maclay Avenue, Brand Boulevard, and Truman Street — tripped breakers that won't hold, dead outlets in kitchens, and flickering lights in rooms fed by overloaded mid-century circuits. The boxy "dingbat" apartment buildings scattered through 91340 generate their own pattern: shared panels, undersized service entrances, and tenant-improvement rewires that need City of San Fernando Building & Safety permits the day work begins.
The light-industrial and commercial corridor along San Fernando Road and Truman Street demands a different toolkit — 3-phase service, high-bay LED replacements, and tenant improvement electrical for the strip malls, warehouses, and specialized commercial units that define the city's commercial base. LED Guys dispatches from Van Nuys, approximately 14 minutes to San Fernando via I-405/I-5, and Jorge carries thermal imaging on every call to locate hot spots inside panels and junction boxes that are invisible to the naked eye.
San Fernando's residential solar adoption ramped between 2018 and 2021. Those systems are now reaching the age where Enphase IQ8 microinverter faults and SolarEdge optimizer failures begin to surface. LED Guys diagnoses and repairs the solar system and the electrical panel integration — one licensed C10 contractor for the complete job. Full scope: panel upgrades, EV charger installation, ADU electrical, recessed LED lighting, commercial 3-phase, generator transfer switches, smart home integration, and complete troubleshooting.
Licensed, bonded, and insured on every San Fernando job. No subcontractors — Jorge handles all work with his own crew. Verify at cslb.ca.gov #1137497.
Call Now — (818) 588-7819How It Works — Start to Finish
Every job in San Fernando follows the same four-step process — no surprises, no subcontractors, and no invoice that doesn't match the estimate.
Call or Request Estimate
Call (818) 588-7819 or email jorge@ledguyservice.com. Jorge answers directly — no dispatcher. Same-day appointments available throughout San Fernando 91340–91341.
Diagnosis & Inspection
Full inspection with thermal imaging, circuit tracing, and load analysis. Root cause identified — not just the surface symptom. Written estimate provided before any work begins.
Repair, Upgrade, or Install
All work performed by Jorge's licensed crew. Permits pulled through the City of San Fernando Building & Safety Division when required. Clean worksite, on-schedule completion.
Inspection & Sign-Off
LED Guys coordinates the final inspection with the City of San Fernando. All work meets current California NEC 2022 code. You receive the completed permit record and sign-off.
Electrical Services in San Fernando, CA
From panel upgrades in San Fernando's 1950s–1960s homes to 3-phase commercial work along San Fernando Road and Truman Street — LED Guys handles every electrical need in 91340 and 91341.
Panel Inspections, Upgrades & Replacements
San Fernando's 1940s–1960s homes commonly carry 60A–100A panels with decades of deferred maintenance. LED Guys upgrades to 200A or 400A service — required before adding EV chargers, solar, or significant new circuits. All permits through the City of San Fernando Building & Safety Division.
Panel Services →Electrical Troubleshooting
Circuit tracing, outlet testing, load analysis, and thermal imaging for San Fernando homes and businesses. Hot spots inside panels and junction boxes are diagnosed in seconds — root cause found, not just reset and leave. Same-day diagnosis in most 91340/91341 cases.
Troubleshooting →24/7 Emergency Electrical Service
LED Guys reaches San Fernando in approximately 14 minutes from Van Nuys via I-405/I-5. Burning smell from the panel, sparks from an outlet, a breaker that won't hold — call (818) 588-7819 any hour. Zero overtime charges, nights and weekends included.
Call Now →EV Charger Installation
Level 2 charger installs for Tesla, ChargePoint, and JuiceBox throughout San Fernando. Most 1950s homes need a panel upgrade first — LED Guys runs the load calc and handles both jobs in a single permit cycle through the City of San Fernando.
EV Chargers →ADU Electrical — Subpanel to Final
San Fernando's narrow lots and post-war single-family blocks have become prime ADU territory. LED Guys handles subpanel install, circuit rough-in, finish, and final inspection — all permitted through the City of San Fernando Building & Safety Division.
ADU Electrical →Recessed Lighting & LED Retrofit
Interior and exterior LED upgrades for San Fernando homes and businesses — 40–70% energy savings vs. older fluorescent and incandescent fixtures. Recessed conversion, dimmer compatibility, high-bay commercial, and exterior parking-lot LED. Bundle with panel work for one-trip savings.
LED Lighting →Commercial & 3-Phase Electrical
San Fernando Road's manufacturing, auto, and warehouse corridor demands 3-phase power, high-bay lighting, and panel load calculations. LED Guys handles tenant improvement electrical for the strip malls and specialized commercial units across 91340 — fully permitted, code-compliant.
Commercial →Solar Troubleshooting & Repair
San Fernando homeowners who installed solar between 2018–2021 are now seeing first-generation faults — Enphase IQ8 microinverters offline, SolarEdge optimizers not communicating, string inverters tripping. LED Guys diagnoses and repairs the full system back through the main panel.
Solar Repair →Smart Home & Generator Transfer
Lutron, Leviton, and Kasa smart home integration for San Fernando homeowners modernizing 1950s wiring. Generator transfer switches and backup wiring for residents on the older San Fernando grid who lose power during winter storms — fully permitted, NEC 2022 compliant.
Smart & Backup →Common Electrical Issues in San Fernando Homes
Flickering Lights
In San Fernando's 1940s–1960s homes, flickering typically points to loose connections at the panel or junction boxes, overloaded circuits, or failing breakers in mid-century panels. Thermal imaging locates the source on Maclay or Brand in minutes.
Tripped Breakers That Won't Hold
Repeating breaker trips across 91340 and 91341 signal a failing device or overloaded circuit — not a nuisance to reset and ignore. LED Guys runs full load analysis to determine whether the issue is the breaker, the circuit, or the panel itself.
Dead Outlets
Dead outlets in kitchens, bathrooms, and garages across San Fernando are usually upstream GFCI devices that have tripped silently — or open-circuit aluminum receptacles in pre-1972 homes that need complete replacement.
Power Loss to Specific Rooms
Partial power loss in San Fernando's older homes — back bedrooms going dark, kitchens half-lit — often indicates a failed breaker, a loose connection at the panel, or a damaged neutral in the service entrance. LED Guys traces the fault before touching anything.
Burnt Wires & Aluminum Branches
San Fernando homes built before 1972 frequently have aluminum branch-circuit wiring with oxidized connections at receptacles and switches. These heat under load and are a leading cause of residential electrical fires. LED Guys performs full aluminum remediation.
Solar System Not Producing
San Fernando solar installs from 2018–2021 are now hitting the age where microinverter and optimizer failures appear. LED Guys diagnoses Enphase IQ8 and SolarEdge systems and repairs the full electrical integration — one C10 contractor for the panel and the array.
Recent Electrical Projects in the San Fernando Valley
Every project handled by Jorge's licensed crew — no subcontractors, ever.
Photos from recent Los Angeles County projects. Contact us to discuss your San Fernando job.
5.0 Stars — Verified Google Reviews
Real reviews from homeowners and business owners across the San Fernando Valley. See the full list on Google.
"LED Guys did a great job! Jorge was a pleasure to work with. Prompt, clean and smart. Highly recommend."
"Jorge is the man for any electrical work. He completed lighting installations for my shop and did an excellent job. Professional, efficient, highly satisfied."
"You can't ask for a better electrician than Jorge. He's reliable, communicative, on time, reasonably priced and a pleasure to work with."
"Panel upgrade was smooth start to finish. Jorge pulled all the permits, coordinated inspection, and kept me updated every step of the way."
"Our solar system stopped producing and three other electricians couldn't figure it out. Jorge traced it to a failed optimizer in 30 minutes. Legend."
San Fernando Electrician FAQ
Nearby Cities We Also Serve
Based in Van Nuys, LED Guys provides panel upgrades, troubleshooting, LED lighting, and 24/7 emergency electrical service throughout the San Fernando Valley.
Serving Greater Los Angeles
Based in Van Nuys, LED Guys serves all of the San Fernando Valley, greater Los Angeles, and surrounding cities. Same-day service throughout most of the area.