LED Guys — Licensed Electrician
C10 Licensed — #1137497 — North Hollywood, CA

Level 1 & Level 2 EV Charger Installation — NEMA 14-50 & Hardwired — North Hollywood, CA

Level 1 charging uses your existing 120V outlet for light daily use, while Level 2 delivers 20–60 miles of range per hour via a dedicated 240V circuit — the right choice for most North Hollywood homeowners. We install both NEMA 14-50 GFCI outlets (portable, flexible) and fully hardwired EV chargers (fastest, cleanest install), and we handle all LADBS permits and SCE rebate paperwork from start to finish. If your panel needs an upgrade to support a Level 2 charger, we do that too — written quote, same-day response.

Call (818) 588-7819 Email for a Quote
5.0 Google Rating
C10 Licensed
$0 Written Quotes
C10 Licensed #1137497 · Bonded & Insured · LADBS Permits Pulled · Level 1 & Level 2 Installations · NEMA 14-50 & Hardwired · All EV Brands · SCE Rebates Filed · Written Quote
EV CHARGER SERVICE AREA

Every Neighborhood We Serve in North Hollywood & the San Fernando Valley

From the residential corridors of Lankershim Boulevard to the hillside streets of Cahuenga Pass and the dense neighborhoods near Magnolia Boulevard — LED Guys installs EV chargers throughout North Hollywood and the entire San Fernando Valley.

Lankershim Blvd Magnolia Blvd 91601 91602 91605 91606 Cahuenga Pass Victory Blvd Vineland Ave NoHo Arts District Chandler Blvd Tujunga Village Burbank Blvd Coldwater Canyon Ave Whitsett Ave Laurel Canyon Blvd Hollywood Freeway Corridor Vanowen St
5.0
Google Rating
C10
Licensed #1137497
10+
Years of Electrical Experience
$0
Written Quotes
About LED Guys

North Hollywood's Licensed EV Charger Installer

LED Guys is a licensed C10 electrical contractor based in Van Nuys, serving North Hollywood and the entire San Fernando Valley. Jorge, the owner and lead electrician, has been installing EV chargers, upgrading electrical panels, and handling complex residential and commercial electrical work for over 10 years. Every EV charger installation is backed by a proper permit pulled through LADBS or the applicable city jurisdiction — no shortcuts, no unpermitted work.

We specialize in Level 2 EV charger installations, whether that means adding a NEMA 14-50 GFCI outlet in your garage, running a hardwired 48A circuit to a wall-mounted unit, or upgrading your panel from 100A to 200A to support the added load. We work with every major EV charger brand and every vehicle make — Tesla, Ford, Rivian, Chevy, BMW, Hyundai, Kia, and more.

From the initial call to the final inspection sign-off, Jorge handles everything personally. We pull the permit, coordinate with LADBS, schedule the inspection, and file your SCE rebate paperwork — all at no additional charge. Our pricing is upfront and written, and our estimates are always free. There are no hidden fees and no overtime charges, even for same-day and weekend service calls.

SCE Energy Efficiency & EV Rebates

Southern California Edison offers rebates on qualifying Level 2 EV charger installations through its Charge Ready Home and EV Accelerate At Home programs. Eligible customers can receive a rebate of up to $1,000 on the cost of installation, with additional incentives for income-qualified households. LED Guys handles all SCE rebate paperwork and documentation at no charge to the homeowner — we make sure you receive every dollar you are entitled to before we consider the job complete.

Response Time 20–30 min across the San Fernando Valley from Van Nuys
Permit Authority LADBS · LA County · City of North Hollywood · SCE Utility Coordination
Service Area San Fernando Valley & Greater LA — 6641 Kester Ave, Van Nuys, CA 91405
Emergency 24/7 — Zero Overtime Charges
SCE Rebates EV Charger Rebates Available — We Handle All Paperwork
Estimate Free — Written — Same Day
Charging Options Explained

Level 1 vs Level 2 EV Charging — Which Is Right for North Hollywood Drivers?

Level 1 — 120V Standard Outlet

  • Speed: 3–5 miles of range per hour of charging
  • Equipment: Uses standard household outlet — no new wiring required
  • Best for: Drivers with short daily commutes under 30 miles, secondary vehicles, or renters
  • Cost:$0 install for outlet already present / $150–$300 to add a dedicated outlet
  • Overnight charge restores 30–40 miles — sufficient for light daily use

Level 2 — 240V Dedicated Circuit

  • Speed: 20–60 miles of range per hour of charging
  • Equipment: Requires dedicated 240V circuit — NEMA 14-50 outlet OR hardwired unit
  • Best for: Daily drivers, long commuters, households with 2+ EVs, anyone who wants a full charge every morning
  • Cost: Varies by panel capacity, run length, and installation method — free quote provided
  • Overnight charge restores 150–350+ miles — full charge for nearly all EV models
Installation Method

NEMA 14-50 Outlet vs Hardwired EV Charger — What LED Guys Recommends

NEMA 14-50 GFCI Outlet

  • How it works: A dedicated 240V, 4-prong outlet is installed in your garage or exterior wall. Your charger plugs into it — just like an appliance.
  • Max output: 40A continuous (50A circuit with GFCI protection required by NEC code)
  • Pros: Charger is portable — take it with you if you move or upgrade vehicles. Versatile outlet usable for other 240V appliances.
  • Cons: Plug connection point can wear over time. GFCI breakers required by code can cause nuisance tripping on some charger models. Slightly slower than hardwired 48A+ units.
  • Who it is for: Renters or homeowners planning to move within 3–5 years, buyers who want to keep charger flexibility, budget-conscious installs.
"We install GFCI-rated 14-50 outlets correctly every time — and we select breakers that eliminate nuisance tripping issues." — Jorge

Hardwired Direct Connection

  • How it works: The charger is permanently wired directly to your electrical panel — no plug, no outlet. Sealed conduit run to charger mounting location.
  • Max output: 48A–80A depending on panel capacity and charger model
  • Pros: Cleanest, safest installation. Fastest possible charge rate. No connection point to wear out. Preferred by all major charger manufacturers and by LADBS inspectors.
  • Cons: Charger cannot be unplugged and relocated without an electrician.
  • Who it is for: Homeowners staying long-term, anyone wanting maximum speed and a professional-looking install, multi-EV households, ADUs with dedicated panels.
"For most homeowners in North Hollywood, we recommend hardwired — it is cleaner, faster, and holds up better over years of daily use." — Jorge
Brands We Install

The 10 Most Trusted EV Charger Brands — Installed by a Licensed Electrician

LED Guys installs all major EV charger brands and can help you select the right unit for your panel capacity, vehicle type, and budget — no upsells, just honest advice.

ChargePoint

Home Flex (16–50A adjustable)

Top-rated smart charger — works with all EVs, excellent app, dial-down amperage for older panels. Requires 50A dedicated circuit.

Tesla

Wall Connector (48A)

Ideal for Tesla owners — integrates with Tesla app and Powerwall. NACS connector standard. Hardwired only at full 48A output.

Emporia

Level 2 (48A)

Best value smart charger — real-time energy monitoring, solar integration, load management. Plug-in or hardwired.

Grizzl-E

Classic & Smart (40A)

Built for tough conditions — fully weatherproof, Canadian-engineered, lifetime cable warranty. Excellent for outdoor installs.

JuiceBox

40A & 48A

One of the longest-running smart charger brands — solid app, utility rebate eligibility, widely supported.

Wallbox

Pulsar Plus (48A)

Most compact Level 2 charger available — smart app, power sharing for 2-EV households, sleek design.

Enel X

JuiceBox Pro (48A)

Utility-grade smart charging — often preferred by commercial and multi-family installs, strong SCE rebate support.

Lectron

NEMA 14-50 & Hardwire (40–48A)

Budget-friendly with excellent reviews — straightforward units without unnecessary app complexity.

EVIQO

48A Smart Charger

Fast-growing brand competing directly with Wallbox and Emporia at a lower price point — solid build quality and clean app.

Autel

MaxiCharger (50A)

Strong value at the high-amp tier — OCPP compatible, commercial-grade durability, recommended for multi-car garages.

Not sure which brand is right for your vehicle and panel? Jorge will assess your setup during the written quote and recommend the best option for your budget and charging needs. No upsells, no pressure.
How It Works

Our EV Charger Installation Process — Simple, Permitted & Done Right

01

Call or Email Jorge

Reach Jorge directly at (818) 588-7819 or Jorge@ledguyservice.com. Describe your vehicle, your garage setup, and any panel concerns — he will ask the right questions to prepare an accurate quote.

02

Free Written EV Charger Quote

Jorge provides a free, written estimate covering circuit installation, conduit routing, panel assessment, NEMA 14-50 vs hardwired recommendation, and any panel upgrade cost if needed.

03

Permit Pulled & Install Scheduled

We pull the required LADBS or city permit before any work begins. Installation typically takes 2–4 hours. We schedule around you — including evenings and weekends at no extra charge.

04

Final Inspection & SCE Rebate Filed

We coordinate the final inspection with the permit authority and ensure it passes on the first visit. Once complete, we file your SCE EV charger rebate paperwork on your behalf — at no charge.

All Services

Electrical & Lighting Services by LED Guys

Electrical Services

Electrical Panel Upgrades

100A to 200A and beyond. We upgrade panels to support EV chargers, ADUs, and whole-home rewires. Fully permitted through LADBS.
EV Charger Info

EV Charger Installation

Level 1 and Level 2 EV charger installation. NEMA 14-50 GFCI outlets, hardwired units, and panel upgrades. All brands supported.
Interior Lighting

LED Lighting Installation

Recessed LED lighting, strip lighting, and full fixture upgrades for kitchens, living areas, and commercial spaces.
Commercial Lighting

Commercial LED Retrofits

Full commercial LED retrofit services — warehouses, retail, office buildings. DLC-listed fixtures, utility rebate eligible.
Electrical Services

Full Home Rewiring

Complete rewiring of older homes with outdated knob-and-tube or aluminum wiring. Fully permitted, inspected, and code-compliant.
Electrical Services

ADU & Garage Conversion Electrical

Sub-panels, dedicated circuits, EV-ready outlets, and full electrical build-outs for ADUs and garage conversions.
Interior Lighting

Lutron & Smart Home Lighting

Lutron Caseta, RA2 Select, and full smart lighting integrations. Works with Apple HomeKit, Google Home, and Amazon Alexa.
Interior Lighting

Landscape & Estate Lighting

Low-voltage and line-voltage landscape lighting, pathway lighting, and architectural accent lighting for estates and custom homes.
Studio Electrical

Recording Studio Electrical

Isolated grounds, star-grounding, dedicated audio circuits, and panel work for professional recording studios and post-production facilities.
Electrical Services

New Construction Electrical

Full rough-in and trim-out electrical for new residential and commercial construction. EV-ready circuits, sub-panels, and service entrance work.
Electrical Services

Solar & Battery Backup Wiring

Tesla Powerwall, Enphase, and Franklin WH battery backup wiring and interconnect. Solar-ready panel upgrades and transfer switch installation.
Call Now

24/7 Emergency Electrical

Tripped breakers, burning smells, no power, sparking outlets — call Jorge 24/7 at (818) 588-7819. Zero overtime charges, ever.
Common Questions

EV Charger Installation Questions — North Hollywood

Will my electrical panel handle a Level 2 charger?

Most homes in North Hollywood have 100A or 200A service. A Level 2 charger typically requires a dedicated 50A circuit — meaning your panel must have at least 50A of available capacity after load calculation. 200A panels usually can accommodate this without an upgrade. Many 100A panels cannot, particularly if HVAC, electric water heaters, or other large loads are already on the panel. Jorge performs a full load calculation during the written quote and tells you exactly what is needed before any work begins.

How long does a Level 2 EV charger installation take?

A standard Level 2 charger installation — running a new circuit from the panel, installing conduit, mounting the charger or NEMA outlet — typically takes 2–4 hours. If a panel upgrade is required, that adds a half-day to a full day of additional work. Permit timelines through LADBS or the City of Los Angeles typically range from same-day online approval to 2–5 business days depending on the scope of work. Jorge schedules the permit inspection and coordinates with you directly.

Do I need a permit for an EV charger in North Hollywood?

Yes — a permit is required for any new electrical circuit, including EV charger installations, under LADBS and City of Los Angeles jurisdiction. LED Guys pulls every required permit before work begins. Unpermitted EV charger installations can void your homeowner's insurance coverage, create problems at resale, and leave you liable if an electrical issue arises. We handle all permit applications, fees, and final inspection scheduling as part of every job.

NEMA 14-50 or hardwired — which is really better?

For most North Hollywood homeowners staying in their home long-term, hardwired is the better choice — it supports higher amperage (48A vs 40A), eliminates plug wear, and results in a cleaner, more permanent installation that LADBS inspectors prefer. The NEMA 14-50 GFCI outlet is the right call for renters, homeowners planning to move within a few years, or anyone who wants the flexibility to take their charger with them. Jorge will give you an honest recommendation based on your specific situation, not what costs more.

Can I get a tax credit or rebate on my EV charger installation?

Yes. The federal 30C Alternative Fuel Vehicle Refueling Property Credit allows homeowners to claim up to 30% of the cost of the charger and installation (max $1,000 for residential), filed on IRS Form 8911. Southern California Edison offers additional rebates through its Charge Ready Home program for qualifying Level 2 installations. Some LADWP customers may also be eligible for separate incentive programs. LED Guys documents all installation costs and provides the paperwork you need to file all applicable credits and rebates.

What if I have a Tesla, Ford, Rivian, or another brand?

We install EV chargers for every vehicle make and model. All non-Tesla EVs use the J1772 connector standard, and all Level 2 chargers we install are compatible. Tesla vehicles use the NACS (North American Charging Standard) connector — we install the Tesla Wall Connector for Tesla owners and can advise on NACS adapter options for non-Tesla chargers. Ford Lightning, Rivian R1T/R1S, Chevy Silverado EV, BMW i4, Hyundai Ioniq, Kia EV6, and all other EVs are fully supported.

What Clients Say

5.0 Stars — Verified Google Reviews

★★★★★

I recently hired Jorge to install LED strip lights for my custom cabinets, and I couldn't be happier. Professional, punctual, and incredibly skilled. The wiring was neatly hidden and the setup works seamlessly. Highly recommend for anyone looking for top-notch electrical work.

— AAdesign Firm
★★★★★

Very knowledgeable and punctual. Easy to work with and reasonably priced. I will definitely use them in the future for all my lighting and electrical needs.

— Yacoub Kawaja
★★★★★

Jorge is the man for any electrical work. He completed lighting installations for my shop and did an excellent job. Professional, efficient, highly satisfied. I highly recommend Jorge for any electrical issues or projects.

— Zubair Kohbandi · Local Guide
★★★★★

You can't ask for a better electrician than George. He's reliable, communicative, on time, reasonably priced and a pleasure to work with. I've called George for multiple projects, including panel upgrades, recess lighting and even technical issues and he has performed like a champion every time.

— Paul H
★★★★★

I've worked with many electricians over the years, and he's by far the best. His prices are great, he's always on time, reliable, and gets the job done without any issues. If you need an electrician you can truly count on, reach out to him — you won't be disappointed.

— Bardia Danesh
★★★★★

LED Guys were awesome! They replaced and repaired my open sub panel quickly and made the whole process super easy. Friendly, professional, and explained everything in a way that made sense. Great to have peace of mind knowing the job was done right.

— Ryan Schneider
Read Our Google Reviews
Service Area

Serving North Hollywood & All of the San Fernando Valley

LED Guys is based in Van Nuys and serves all of North Hollywood, Burbank, Studio City, Sun Valley, and the broader San Fernando Valley — typically reaching any job site within 20–30 minutes.

Common Questions

EV Charger Installation FAQ — North Hollywood

Most Level 2 chargers require a dedicated 40A–50A circuit. Your electrical panel must have sufficient available capacity after accounting for all existing loads — HVAC, water heater, kitchen appliances, and general circuits. A 200A panel usually can accommodate a Level 2 charger without an upgrade, provided enough slots are open. A 100A panel may not have enough headroom, especially in older North Hollywood homes. Jorge performs a full NEC-compliant load calculation during the written quote to determine exactly what your panel can handle before recommending a solution.
North Hollywood falls under LADBS (Los Angeles Department of Building and Safety) jurisdiction. A permit is required for any new electrical circuit installation. LED Guys submits the permit application on your behalf — often through LADBS Express or the online ePlanLA system — and schedules the final inspection once work is complete. Permit timelines range from same-day approval for simple circuits to 2–5 business days for jobs involving panel upgrades. We manage the entire process and include permit fees as a transparent line item in every written estimate.
Level 1 charging (120V standard outlet) delivers 3–5 miles of range per hour — adequate for drivers who commute fewer than 30 miles per day and charge overnight. Level 2 charging (240V dedicated circuit) delivers 20–60 miles of range per hour, providing a full charge overnight for virtually every EV on the market. For most North Hollywood homeowners who drive daily, Level 2 is the practical choice. The incremental installation cost is offset quickly by the convenience of waking up to a fully charged vehicle every morning.
Hardwired is generally the superior long-term installation — it supports higher amperage output (48A vs 40A continuous), eliminates the plug-and-outlet wear point, and is preferred by LADBS inspectors and all major charger manufacturers. The NEMA 14-50 GFCI outlet is the better choice for renters, homeowners who may relocate within a few years, or anyone who values the ability to take their charger with them. Both are installed correctly and to code by LED Guys — the choice depends on your situation, not which one costs more.
A straightforward Level 2 EV charger installation — new 50A dedicated circuit, conduit run to garage, NEMA 14-50 outlet or hardwired mount — typically ranges from $400 to $900 depending on the distance from the panel to the charger location and the complexity of the conduit run. Panel upgrades (if required) are quoted separately. After applying the federal 30C tax credit (up to 30% of eligible costs) and any applicable SCE rebate (up to $1,000), the net cost to most homeowners is significantly lower than the gross installation price. LED Guys provides a written quote before any work begins.
Southern California Edison customers served by SCE in North Hollywood may be eligible for the Charge Ready Home program, which offers rebates on qualifying Level 2 EV charger installations. Rebate amounts vary depending on income qualification status and charger model. LED Guys files all required SCE documentation, including installation records and charger specifications, on your behalf at no charge. We also document all installation costs to support your federal Form 8911 filing for the 30C Alternative Fuel Vehicle Refueling Property Credit.
Nearby Areas

EV Charger Installation Near North Hollywood

Van Nuys Burbank Studio City Sun Valley Sherman Oaks Reseda Panorama City Glendale

Get a Free EV Charger Installation Quote in North Hollywood

Jorge responds same-day to all quote requests from North Hollywood and the surrounding San Fernando Valley. Whether you need a NEMA 14-50 outlet, a hardwired Level 2 charger, or a panel upgrade to support EV charging, the estimate is always free, written, and without obligation. Call or email today and we will have a quote to you before end of day.

Call (818) 588-7819 Email Jorge@ledguyservice.com

Also serving North Hollywood

General Electrical Services in North Hollywood  •  Solar Battery Storage in North Hollywood

Tesla Wall Connector Certified Installer GlowbackLED Trusted Lighting Installer GlowbackLED® Trusted Lighting Installer
Tesla Energy Certified  —  GlowbackLED Trusted Installer

Certified by Tesla Energy for Wall Connector and Powerwall

The Tesla Energy Certified Installer designation identifies professionals who have completed Tesla Energy training, hold deep technical knowledge of Tesla Energy products, and deliver the highest-quality installations for Tesla customers. LED Guys holds this certification for both product lines — a combination very few Los Angeles electricians can offer.

Tesla Wall Connector installed by LED Guys in Los Angeles

Wall Connector Certified Installer

LED Guys is certified by Tesla Energy to install the Tesla Wall Connector and Universal Wall Connector to Tesla's own installation standards. That certification covers the full scope of a residential or commercial Wall Connector project: conductor sizing per NEC Article 625, dedicated circuit breaker selection, conduit and wire routing, GFCI breaker protection per NEC 625.54, and proper grounding and bonding at the panel.

After the physical installation, Jorge commissions the Wall Connector through the Tesla One app — connecting the unit to Wi-Fi, registering it to your Tesla account, setting the output amperage to match your circuit, and configuring access controls if you want to restrict charging to authorized vehicles. For multi-vehicle homes and commercial sites, we configure Power Sharing so up to six Wall Connectors intelligently share a single circuit without exceeding its capacity.

The Wall Connector delivers up to 48 amps on a 60-amp circuit, the fastest Level 2 charging Tesla offers for home use. Its built-in amperage adjustment (12, 16, 24, 32, 40, or 48 amps) means it works with any panel — from a 100-amp service with limited headroom to a 400-amp commercial main. Tesla's NACS connector is now the North American charging standard (SAE J3400), so the Wall Connector charges Teslas natively and other EV brands via adapter or native NACS port. The Universal Wall Connector adds a built-in J1772 connector for households with mixed EV brands.

Powerwall Certified Installer

Certified for Tesla Powerwall home battery installations — whole-home backup, Backup Gateway integration, solar coordination, and Charge on Solar setup so your Tesla charges from excess solar production automatically.

Powerwall installations include gateway wiring, backup circuit selection based on your household's critical loads, and utility interconnection paperwork for LADWP net metering. Jorge configures Storm Watch, self-consumption mode, and time-based control through the Tesla app so your system responds automatically to grid conditions and rate schedules.

Tesla Charger Installation Call (818) 588-7819
GlowbackLED Trusted Lighting Installer GlowbackLED® Trusted Lighting Installer
Lighting Partner

GlowbackLED Trusted Lighting Installer

LED Guys is a GlowbackLED Trusted Lighting Installer — a designation earned by electrical contractors who consistently deliver high-quality installations of GlowbackLED's custom LED lighting systems. GlowbackLED is a US-based designer and manufacturer of architectural LED solutions: custom LED panels, recessed and pendant linear fixtures, LED aluminum channels, and cabinet lighting built to specification for high-end residential and commercial projects.

When a project calls for custom-fabricated LED lighting — a coffered ceiling with built-in linear channels, back-lit niches, under-cabinet strip lighting with dimmer controls, or a commercial lobby with signature pendant fixtures — Jorge sources components from GlowbackLED and installs them to their technical specifications. Every GlowbackLED installation includes proper driver placement, dimmer compatibility verification, and clean concealed wiring so the finished result matches the design intent.

LED Lighting Services
GlowbackLED architectural lighting installed by LED Guys in Los Angeles