
LED Guys is a C10-licensed electrical contractor serving Hancock Park's historic estates, pre-war Tudor Revival and Spanish Colonial homes, and commercial properties along Larchmont Boulevard. We specialize in full LED lighting upgrades, EV charger installation, electrical panel upgrades, and 24/7 emergency service — all permitted through the Los Angeles Department of Building and Safety before any work begins. Every estimate includes a free electrical load calculation and zero overtime charges, any day of the week.
Hancock Park's housing stock — dominated by 1920s Tudor Revival, Spanish Colonial, and Châteauesque estates — presents electrical challenges that most contractors are not equipped to handle. Aging knob-and-tube wiring, original 60-amp panels, and pre-modern conduit pathways are common throughout the 90004, 90020, and 90036 ZIP codes. LED Guys brings over a decade of Los Angeles residential experience to every project, with a deep understanding of how to safely upgrade historic structures without compromising their architectural integrity or your HPOZ status.
Every Hancock Park project starts with a free electrical load calculation — a thorough assessment of your current panel capacity against your actual usage demands. This matters especially when adding EV chargers, whole-home LED systems, or sub-panels for ADUs and garage conversions. Unlike competitors who skip this step and leave homeowners with overloaded circuits, we give you a complete picture before a single wire is touched. We then pull all required LADBS permits prior to commencing work, protecting your investment and your home's resale value.
Our teams serve Windsor Square, Larchmont Village, and the broader Greater Wilshire corridor, arriving in fully stocked service vehicles within our standard dispatch window. We charge no overtime — a service call at 10 p.m. on a Sunday costs the same as a weekday morning visit. Whether you need recessed LED lighting throughout a 4,000-square-foot period home, a Level 2 EV charger on a detached garage, or an emergency panel replacement, LED Guys delivers clean, code-compliant work on every visit.
From first call to final inspection, we keep you informed at every step — no surprises, no hidden fees.
We assess your panel, wiring condition, and planned upgrades. Every estimate includes a complimentary NEC-compliant load calculation at no charge.
We pull all required permits through the Los Angeles Department of Building and Safety before any work begins — protecting your home and your resale value.
Our C10-licensed electricians complete your project using code-compliant materials and techniques, with a clean worksite guaranteed at the end of every visit.
We schedule and manage the final city inspection, coordinate the sign-off, and provide IRS Form 8911 documentation for qualifying EV charger installations.
Every service listed below is available to Hancock Park homeowners and businesses. One licensed team, one call — no subcontracting.
Many Hancock Park homes still run on original 60–100-amp panels that cannot support modern LED systems, EV chargers, or air conditioning loads. We upgrade to 200-amp service in a single permitted visit.
Electrical ServicesLevel 2 hardwired EV charger installation for Hancock Park's detached garages and estate driveways. We handle LADBS permits, load calculations, and IRS Form 8911 documentation for the federal 30C tax credit.
EV Charger InfoRecessed LED lighting, LED strip systems, and full interior lighting redesigns for Hancock Park's historic homes. We match fixture styles to period architecture while delivering modern energy efficiency.
Interior LightingFull LED retrofit services for Larchmont Boulevard retailers, medical offices, and commercial properties throughout the Hancock Park corridor. Reduce operating costs with code-compliant commercial-grade LED systems.
Commercial LightingComplete knob-and-tube and aluminum wiring replacement for Hancock Park's 1920s–1940s estates. We plan every rewire to minimize disruption to plaster walls, original millwork, and historic finishes.
Electrical ServicesElectrical rough-in, sub-panel installation, and lighting for ADU and garage conversions in Hancock Park. We coordinate with LADBS and your general contractor from permit to final inspection.
Electrical ServicesLutron Caseta and RadioRA system installation for Hancock Park's estate homes. Whole-home dimming, scene control, and smart integration installed and programmed by a licensed C10 contractor.
Interior LightingLow-voltage and line-voltage landscape lighting for Hancock Park's palm-lined grounds, courtyards, and front estates. We design systems that highlight architecture while meeting city setback and permitting requirements.
Interior LightingDedicated circuit design, isolated grounding, and noise-free power systems for recording studios and home theaters in Hancock Park. We eliminate ground loops and EMI interference at the source.
Studio ElectricalFull electrical rough-in and finish work for new construction and major additions throughout Hancock Park and Greater Wilshire. We work with your architect and GC from design to LADBS final sign-off.
Electrical ServicesElectrical interconnection and battery backup wiring for solar installations in Hancock Park. We handle the tie-in, permits, and LADBS coordination — ready for LADWP net metering enrollment.
Electrical ServicesAround-the-clock emergency electrical response for Hancock Park. Tripped breakers, burning smells, sparking outlets, or sudden power loss — we dispatch immediately with zero overtime charges at any hour.
Call NowHancock Park's 1920s and 1930s housing stock comes with a predictable set of electrical challenges. Here is what we address most frequently.
Thousands of Hancock Park homes were built with original knob-and-tube wiring that lacks a ground conductor and cannot safely carry modern electrical loads. We replace it fully with permitted NM-B or conduit-routed copper wiring, preserving plaster and original wall finishes where possible.
Original service panels in the 90004 and 90036 ZIP codes are routinely undersized for today's EV chargers, central air conditioning, and smart home systems. We upgrade to 200-amp service with a full LADBS permit — often completing panel and EV charger installation in a single day.
Long circuit runs through Hancock Park's large estate homes can cause GFCI outlets to trip under normal use. We identify the source — whether a wiring fault, downstream capacitance, or an improperly wired GFCI — and correct it without replacing functional outlets unnecessarily.
Federal Pacific Stab-Lok and Zinsco panels remain in some Hancock Park homes and are recognized fire hazards. We replace these units immediately with code-compliant Square D or Siemens panels, with full LADBS documentation.
Adding a 50-amp Level 2 EV charger to a home with a loaded 100-amp panel requires a careful load analysis. We perform this calculation at no charge and determine whether a panel upgrade is required before any charger is ordered or installed.
Flickering LED lighting in Hancock Park homes is frequently caused by loose connections at aging junction boxes, incompatible dimmers, or undersized neutral conductors. We trace the fault to its source and correct it — not just the symptom.
A sample of completed LED lighting, panel upgrade, and EV charger installations from our service area.
Real reviews from real clients. We do not pay for placements or incentivize feedback.
"I recently hired Jorge to install LED strip lights for my custom cabinets, and I couldn't be happier. Professional, punctual, and incredibly skilled. The wiring was neatly hidden and the setup works seamlessly. Highly recommend for anyone looking for top-notch electrical work."
"Very knowledgeable and punctual. Easy to work with and reasonably priced. I will definitely use them in the future for all my lighting and electrical needs."
"Jorge is the man for any electrical work. He completed lighting installations for my shop and did an excellent job. Professional, efficient, highly satisfied. I highly recommend Jorge for any electrical issues or projects."
"You can't ask for a better electrician than George. He's reliable, communicative, on time, reasonably priced and a pleasure to work with. I've called George for multiple projects, including panel upgrades, recess lighting and even technical issues and he has performed like a champion every time."
"I've worked with many electricians over the years, and he's by far the best. His prices are great, he's always on time, reliable, and gets the job done without any issues. If you need an electrician you can truly count on, reach out to him — you won't be disappointed."
"LED Guys were awesome! They replaced and repaired my open sub panel quickly and made the whole process super easy. Friendly, professional, and explained everything in a way that made sense. Great to have peace of mind knowing the job was done right."
LED Guys dispatches from Van Nuys to Hancock Park and throughout the Greater Wilshire corridor, including Windsor Square, Larchmont Village, Miracle Mile, Koreatown, and neighboring communities across Central and West Los Angeles.
Answers to the questions Hancock Park homeowners and property managers ask us most often before booking a service call.
LED Guys serves the communities surrounding Hancock Park. Click your city for local electrical and LED lighting information.
Call or email for a written quote. We arrive on time, pull every permit, and never charge overtime — day or night.
The Tesla Energy Certified Installer designation identifies professionals who have completed Tesla Energy training, hold deep technical knowledge of Tesla Energy products, and deliver the highest-quality installations for Tesla customers. LED Guys holds this certification for both product lines — a combination very few Los Angeles electricians can offer.
LED Guys is certified by Tesla Energy to install the Tesla Wall Connector and Universal Wall Connector to Tesla's own installation standards. That certification covers the full scope of a residential or commercial Wall Connector project: conductor sizing per NEC Article 625, dedicated circuit breaker selection, conduit and wire routing, GFCI breaker protection per NEC 625.54, and proper grounding and bonding at the panel.
After the physical installation, Jorge commissions the Wall Connector through the Tesla One app — connecting the unit to Wi-Fi, registering it to your Tesla account, setting the output amperage to match your circuit, and configuring access controls if you want to restrict charging to authorized vehicles. For multi-vehicle homes and commercial sites, we configure Power Sharing so up to six Wall Connectors intelligently share a single circuit without exceeding its capacity.
The Wall Connector delivers up to 48 amps on a 60-amp circuit, the fastest Level 2 charging Tesla offers for home use. Its built-in amperage adjustment (12, 16, 24, 32, 40, or 48 amps) means it works with any panel — from a 100-amp service with limited headroom to a 400-amp commercial main. Tesla's NACS connector is now the North American charging standard (SAE J3400), so the Wall Connector charges Teslas natively and other EV brands via adapter or native NACS port. The Universal Wall Connector adds a built-in J1772 connector for households with mixed EV brands.
Certified for Tesla Powerwall home battery installations — whole-home backup, Backup Gateway integration, solar coordination, and Charge on Solar setup so your Tesla charges from excess solar production automatically.
Powerwall installations include gateway wiring, backup circuit selection based on your household's critical loads, and utility interconnection paperwork for LADWP net metering. Jorge configures Storm Watch, self-consumption mode, and time-based control through the Tesla app so your system responds automatically to grid conditions and rate schedules.
LED Guys is a GlowbackLED Trusted Lighting Installer — a designation earned by electrical contractors who consistently deliver high-quality installations of GlowbackLED's custom LED lighting systems. GlowbackLED is a US-based designer and manufacturer of architectural LED solutions: custom LED panels, recessed and pendant linear fixtures, LED aluminum channels, and cabinet lighting built to specification for high-end residential and commercial projects.
When a project calls for custom-fabricated LED lighting — a coffered ceiling with built-in linear channels, back-lit niches, under-cabinet strip lighting with dimmer controls, or a commercial lobby with signature pendant fixtures — Jorge sources components from GlowbackLED and installs them to their technical specifications. Every GlowbackLED installation includes proper driver placement, dimmer compatibility verification, and clean concealed wiring so the finished result matches the design intent.