LED Guys is based in Van Nuys and installs Level 2 EV chargers throughout Los Angeles and the entire San Fernando Valley — from a NEMA 14-50 GFCI outlet in your garage to a hardwired 48A dedicated circuit for maximum speed. As a Tesla Energy Certified Installer, we handle every brand. All permits pulled through LADBS and the correct department for your city. Free same-day written estimate. Most installations completed within one week of your call.
LED Guys serves the San Fernando Valley from its Van Nuys base and reaches the entire LA metro — Hollywood, the Westside, Pasadena, Burbank, Glendale, Santa Clarita, and beyond. If you are in Los Angeles County, we are near you.
The Tesla Energy Certified Installer designation identifies professionals who have completed Tesla Energy training, hold deep technical knowledge of Tesla Energy products, and deliver the highest-quality installations. LED Guys holds this certification for both the Wall Connector and Powerwall — a combination very few Los Angeles electricians can offer.
Certified to install the Tesla Wall Connector and Universal Wall Connector to Tesla Energy standards — correct conductor sizing, commissioning through the Tesla app, Wi-Fi setup, firmware updates, and Power Sharing configuration for multi-vehicle sites.
Certified for Tesla Powerwall home battery installations — whole-home backup, Backup Gateway integration, solar coordination, and Charge on Solar setup so your Tesla charges from excess solar production automatically.
When you search for EV charger installation near you, the result you want is a licensed electrician who actually covers your neighborhood, pulls the right permit for your city, and shows up on time. LED Guys is based at 6641 Kester Ave in Van Nuys — 20 to 30 minutes from almost everywhere in the San Fernando Valley, Hollywood, and the Westside.
Every installation begins with a free NEC Article 220 load calculation to confirm your panel can support the new circuit. If your panel needs a 200A upgrade first, we handle both in the same project — one crew, one permit application, one inspection, with full utility coordination. No second contractor, no scheduling gaps.
Jorge personally oversees every job. We do not subcontract. We do not start any work without the permit in hand. And we install chargers for every EV brand on the road — Tesla, Ford, Rivian, GM, Hyundai, Kia, BMW, and all others.
Permit authority depends on where you live: City of Los Angeles addresses go through LADBS. Burbank residents use the City of Burbank Building Division. Glendale goes through the City of Glendale Community Development. Pasadena uses the City of Pasadena Building and Safety. Santa Clarita uses the City of Santa Clarita Building Division. Unincorporated LA County areas use LA County Building & Safety. LED Guys identifies the correct authority for your address and handles the entire permit process — application, plan review, issuance, and final inspection sign-off.
Understanding the difference before you install saves money and frustration. Here is the honest breakdown.
Both are code-compliant. The right choice depends on your situation and how long you plan to stay.
"We install GFCI-rated 14-50 outlets correctly every time — and we select breakers that eliminate nuisance tripping issues." — Jorge
"For most homeowners, we recommend hardwired — it is cleaner, faster, and holds up better over years of daily use." — Jorge
LED Guys installs all major brands and helps you select the right unit for your panel, vehicle, and budget.
Installed by a Tesla Energy Certified Installer — commissioned in the Tesla app with Power Sharing setup. The Universal Wall Connector adds built-in J1772 for non-Tesla EVs.
Top-rated smart charger — works with all EVs, excellent app, dial-down amperage for older panels. Requires 50A dedicated circuit.
Best value smart charger — real-time energy monitoring, solar integration, load management. Plug-in or hardwired.
Built for tough conditions — fully weatherproof, Canadian-engineered, lifetime cable warranty. Excellent for outdoor installs.
One of the longest-running smart charger brands — solid app and widely supported.
Most compact Level 2 charger available — smart app, power sharing for 2-EV households, sleek design.
Utility-grade smart charging — often preferred by commercial and multi-family installs.
Budget-friendly with excellent reviews — straightforward units without unnecessary app complexity.
Fast-growing brand competing directly with Wallbox and Emporia at a lower price point — solid build quality and clean app.
Strong value at the high-amp tier — OCPP compatible, commercial-grade durability, recommended for multi-car garages.
Tesla's charging connector — NACS — is now the North American charging standard, published as SAE J3400 and adopted across the auto industry. A Tesla charger installed at your home is no longer just for Teslas: nearly every major automaker has joined the standard.
The Tesla Universal Wall Connector charges any EV out of the box — full 48A NACS charging for Teslas plus a built-in J1772 connector for everything else. The standard Wall Connector charges Teslas natively; NACS-equipped models from other brands plug straight in with no adapter at all.
The same applies to a NEMA 14-50 outlet: it powers the Tesla Mobile Connector today and any other brand's plug-in charger tomorrow. Jorge confirms connector compatibility for every vehicle in your household during the written quote — before you buy any equipment.
The following manufacturers have adopted NACS — via a manufacturer-provided adapter, or with no adapter on newer NACS-equipped models:
Acura · Audi · BMW · Ford · General Motors · Genesis · Honda · Hyundai · JLR · Kia · Lucid · Mercedes-Benz · Nissan · Polestar · Porsche · Rivian · Stellantis · Subaru · Toyota · Volkswagen · Volvo
With millions of EV drivers on LA roads, on-site charging brings more visitors, tenants, and employees to your property. LED Guys installs commercial Level 2 charging throughout the area — including Tesla's Wall Connector for Business program.
Keep and attract tenants with overnight access to on-site charging — the amenity LA renters with EVs now search for first.
Give employees a place to charge during the workday and support your company's sustainability goals.
Offer charging to short- and long-term guests — a deciding factor for EV drivers choosing where to stay.
Keep your electric fleet charged and ready with dedicated, load-managed charging positions.
Attract customers who shop while they charge — and stay longer because of it.
Commercial installations are engineered differently than a single-home charger: Power Sharing lets up to six Wall Connectors intelligently share one circuit, load management protects your building's electrical capacity, and multi-unit conduit runs and subpanels are designed to your site.
LED Guys handles the full commercial scope — NEC load calculations, permits for your city, utility coordination, installation, and commissioning. Call for a commercial site assessment.
Request a Commercial QuoteReach us at (818) 588-7819 or Jorge@ledguyservice.com. Tell us your EV model, garage setup, and panel age — we respond same day in most cases and schedule your free site visit.
Jorge performs a free NEC load calculation, assesses your panel, reviews the install location, and delivers a written fixed-price quote on the spot. No hidden costs, no change orders.
We submit the permit application to the correct authority for your city before scheduling. Work begins only after permit approval. The physical install typically takes 2–4 hours.
We coordinate the final inspection, walk the inspector through the installation, commission smart chargers in their apps, and deliver your signed-off permit documentation.
Use our free Home Electrical Load Calculator — built to NEC 220 standards — to estimate your current load and find out if your panel has room for an EV charger before you call.
Check My Panel Capacity — Free CalculatorNo sign-up required. Takes about 60 seconds. Built by a licensed C10 electrician.
NEMA 14-50 outlet and hardwired 48A dedicated circuits for all EV brands. Fully permitted in every city we serve.
Tesla Energy Certified Installer — commissioned in the Tesla app with Power Sharing. Also installs Tesla Powerwall.
Portable-charger-friendly 240V dedicated outlet with GFCI protection per NEC Article 625.
100A to 200A upgrades for EV charger readiness, home additions, and code compliance. Combined with EV install in one project.
MaxiCharger 50A — commercial-grade durability and OCPP compatibility for multi-car garages and businesses.
48A smart charger with real-time energy monitoring and solar integration. Plug-in or hardwired installation.
Dedicated panel, circuit installation, and EV charger wiring for accessory dwelling units and converted garages.
Complete residential rewiring for older homes, knob-and-tube replacement, and code upgrades throughout Los Angeles.
NEC Article 220 load calc to determine exactly what your panel can support — required before any EV charger install.
Residential and commercial LED retrofit, recessed lighting, and fixture upgrades.
Isolated ground circuits, balanced power, and dedicated studio electrical builds.
Around-the-clock emergency electrical service — no overtime charges, any hour, any city we serve.
If you are in Los Angeles County, almost certainly yes. LED Guys covers the full San Fernando Valley, Hollywood, the Westside, Burbank, Glendale, Pasadena, Santa Clarita, and surrounding areas. Call (818) 588-7819 and Jorge will confirm your address in under a minute.
Same-day estimates in most cases. Permit approval takes 1 to 3 business days for most residential installs. The physical installation is 2 to 4 hours once the permit is in hand. Most customers are fully installed and charging within one week of their first call.
A Level 2 charger needs a dedicated 40 to 60A circuit. Jorge performs a free NEC Article 220 load calculation at every estimate visit. If a 200A panel upgrade is needed first, we handle both in the same project — one crew, one permit application, one inspection.
Yes. We submit to LADBS for City of LA addresses, and to the correct building department for every independent city in our service area — Burbank, Glendale, Pasadena, Santa Clarita, Calabasas, and others. We never start work without the permit in hand.
Yes. As a Tesla Energy Certified Installer we commission Wall Connectors in the Tesla app. For all J1772 and NACS vehicles from other automakers, we install ChargePoint, Emporia, Autel, Grizzl-E, or the Tesla Universal Wall Connector with its built-in J1772 port — one charger that works for every brand.
A NEMA 14-50 outlet in a garage near the panel typically runs $300 to $600. A full hardwired 48A installation with conduit run and permit is usually $600 to $1,200. Panel upgrades are quoted separately. Every quote is free, written, and itemized — no surprise costs.
"I recently hired Jorge to install LED strip lights for my custom cabinets, and I couldn't be happier. Professional, punctual, and incredibly skilled. The wiring was neatly hidden and the setup works seamlessly. Highly recommend for anyone looking for top-notch electrical work."
"Very knowledgeable and punctual. Easy to work with and reasonably priced. I will definitely use them in the future for all my lighting and electrical needs."
"Jorge is the man for any electrical work. He completed lighting installations for my shop and did an excellent job. Professional, efficient, highly satisfied. I highly recommend Jorge for any electrical issues or projects."
"You can't ask for a better electrician than George. He's reliable, communicative, on time, reasonably priced and a pleasure to work with. I've called George for multiple projects, including panel upgrades, recess lighting and even technical issues and he has performed like a champion every time."
"I've worked with many electricians over the years, and he's by far the best. His prices are great, he's always on time, reliable, and gets the job done without any issues. If you need an electrician you can truly count on, reach out to him — you won't be disappointed."
"LED Guys were awesome! They replaced and repaired my open sub panel quickly and made the whole process super easy. Friendly, professional, and explained everything in a way that made sense. Great to have peace of mind knowing the job was done right."
LED Guys is based in Van Nuys and serves the full San Fernando Valley, Hollywood, the Westside, Burbank, Glendale, Pasadena, Santa Clarita, and surrounding areas — with fast response times and zero overtime charges for 24/7 calls.
LED Guys serves all of Los Angeles and the San Fernando Valley with same-day written estimates, permitted installations for every city, and no overtime charges — ever. Jorge personally handles every job from permit application through final inspection sign-off. Call or email today to get scheduled.
The Tesla Energy Certified Installer designation identifies professionals who have completed Tesla Energy training, hold deep technical knowledge of Tesla Energy products, and deliver the highest-quality installations for Tesla customers. LED Guys holds this certification for both product lines — a combination very few Los Angeles electricians can offer.
LED Guys is certified by Tesla Energy to install the Tesla Wall Connector and Universal Wall Connector to Tesla's own installation standards. That certification covers the full scope of a residential or commercial Wall Connector project: conductor sizing per NEC Article 625, dedicated circuit breaker selection, conduit and wire routing, GFCI breaker protection per NEC 625.54, and proper grounding and bonding at the panel.
After the physical installation, Jorge commissions the Wall Connector through the Tesla One app — connecting the unit to Wi-Fi, registering it to your Tesla account, setting the output amperage to match your circuit, and configuring access controls if you want to restrict charging to authorized vehicles. For multi-vehicle homes and commercial sites, we configure Power Sharing so up to six Wall Connectors intelligently share a single circuit without exceeding its capacity.
The Wall Connector delivers up to 48 amps on a 60-amp circuit, the fastest Level 2 charging Tesla offers for home use. Its built-in amperage adjustment (12, 16, 24, 32, 40, or 48 amps) means it works with any panel — from a 100-amp service with limited headroom to a 400-amp commercial main. Tesla's NACS connector is now the North American charging standard (SAE J3400), so the Wall Connector charges Teslas natively and other EV brands via adapter or native NACS port. The Universal Wall Connector adds a built-in J1772 connector for households with mixed EV brands.
Certified for Tesla Powerwall home battery installations — whole-home backup, Backup Gateway integration, solar coordination, and Charge on Solar setup so your Tesla charges from excess solar production automatically.
Powerwall installations include gateway wiring, backup circuit selection based on your household's critical loads, and utility interconnection paperwork for LADWP net metering. Jorge configures Storm Watch, self-consumption mode, and time-based control through the Tesla app so your system responds automatically to grid conditions and rate schedules.
LED Guys is a GlowbackLED Trusted Lighting Installer — a designation earned by electrical contractors who consistently deliver high-quality installations of GlowbackLED's custom LED lighting systems. GlowbackLED is a US-based designer and manufacturer of architectural LED solutions: custom LED panels, recessed and pendant linear fixtures, LED aluminum channels, and cabinet lighting built to specification for high-end residential and commercial projects.
When a project calls for custom-fabricated LED lighting — a coffered ceiling with built-in linear channels, back-lit niches, under-cabinet strip lighting with dimmer controls, or a commercial lobby with signature pendant fixtures — Jorge sources components from GlowbackLED and installs them to their technical specifications. Every GlowbackLED installation includes proper driver placement, dimmer compatibility verification, and clean concealed wiring so the finished result matches the design intent.