Autel EV Charger Installation in Los Angeles, CA — MaxiCharger Level 2, NEMA 14-50 & Hardwired
LED Guys installs the full Autel MaxiCharger lineup across Los Angeles — the AC Lite Home 40A plug-in, the AC Elite Home 40A and 50A, and the hardwired 50A NACS unit for Tesla drivers. As a C10 licensed electrical contractor and Tesla Energy Certified Installer, we size the dedicated circuit correctly, pull the permit through the Los Angeles Department of Building and Safety (LADBS), complete full NEC Article 625 compliance, and commission your MaxiCharger in the Autel Charge app before we leave. Most installations are done in a single visit — and if your panel needs an upgrade first, we handle both in the same project.
Why Autel — And Why a Licensed Installer
Autel has built automotive diagnostic equipment since 2004, and its MaxiCharger line has become one of the strongest values in Level 2 home charging: ENERGY STAR certified, NEMA 4X weatherproof for outdoor mounting, app-adjustable amperage, a 25-foot cable, RFID access control, and a 3-year warranty. At the high-amp tier, the MaxiCharger delivers commercial-grade durability at a price that undercuts most competing smart chargers — which is exactly why Jorge recommends Autel so often for multi-car garages and budget-conscious homeowners who still want full 48–50A charging speed.
But the charger is only half the job. A 50A Autel unit needs a dedicated 60A circuit, correct conductor sizing, and headroom in your panel confirmed by a real NEC Article 220 load calculation — not a guess. LED Guys is a C10 licensed electrical contractor based in Van Nuys, fully bonded and insured. Jorge personally performs every installation with his own crew, no subcontractors, and does not start work without a permit in hand. If your 100A panel needs a 200A upgrade to support the charger, we handle both in one project — one crew, one permit application, one inspection, with full LADWP service coordination.
Every Autel installation ends with commissioning: Wi-Fi and Bluetooth setup, firmware updates, amperage configuration matched to your circuit, and charging schedules set in the Autel Charge app so you charge on off-peak rates. You get a working, permitted, inspected charger — not a box on the wall.
Permit Authority & Requirements for Los Angeles
Autel EV charger installations in the City of Los Angeles are permitted through the Los Angeles Department of Building and Safety (LADBS). A permit is required under NEC Article 625 for all dedicated-circuit Level 2 EV charger installations — plug-in NEMA 14-50 and hardwired alike. LED Guys manages the complete permit process from application submission through plan review, permit issuance, and final inspection sign-off. Unpermitted EV charger installations can void your homeowner's insurance, create liability during a home sale, and fail inspections that require costly rework. We pull the permit before any wire is run — always.
Every Autel MaxiCharger We Install — And Who Each One Is For
Autel's home lineup covers two tiers — AC Lite and AC Elite — in 40A and 50A versions, with plug-in and hardwired supply options and both J1772 and NACS connectors. Here is the honest breakdown.
MaxiCharger AC Lite Home 40A — Plug-In
- Speed: Up to 40A continuous — roughly 30–40 miles of range per hour of charging
- Supply: Plugs into a dedicated 240V NEMA 14-50 GFCI outlet on a 50A circuit
- Features: Adjustable 16–40A output in the app, ENERGY STAR certified, NEMA 4X weatherproof, RFID card access, voice assistant
- Best for: Renters, homeowners who may move, and anyone who wants charger portability at Autel's lowest price point
"The Lite plug-in is the value pick — but the outlet behind it still needs a permitted 50A GFCI circuit installed correctly. That is the part we do." — Jorge
MaxiCharger AC Lite Home 50A — Hardwired
- Speed: Up to 50A continuous on a dedicated 60A circuit — Autel's fastest home charging
- Supply: Permanently wired to your panel — no plug to wear out, sealed conduit run
- Features: 6–50A adjustable output, Wi-Fi, Bluetooth, Ethernet, 25-foot cable, 3-year warranty
- Best for: Long-term homeowners who want maximum speed; the NACS version is a strong lower-cost alternative for Tesla drivers
"For most homeowners staying put, hardwired 50A is what I recommend — cleanest install, fastest charge, and inspectors prefer it." — Jorge
MaxiCharger AC Elite Home 40A
- Speed: Up to 40A continuous (9.6kW) with app-adjustable amperage from 6A
- Features: Upgraded build with 25-foot cable, energy tracking and charge scheduling in the Autel Charge app, indoor or outdoor mounting
- Best for: Households that want the plug-in flexibility of a 14-50 outlet with a more premium unit on the wall
MaxiCharger AC Elite Home 50A
- Speed: Up to 50A continuous — a full charge overnight for nearly every EV sold
- Features: Autel's flagship home unit — full connectivity, energy monitoring, scheduling, and load-matched amperage set at commissioning
- Best for: Multi-EV households, long-range EVs and trucks, and anyone who wants the fastest permitted home setup available
What You Get With Us That Most Installers Skip
Plenty of companies will screw a charger to your wall. Here is what separates a licensed, permitted LED Guys installation from the quotes you will get elsewhere in Los Angeles.
Permit pulled on every job — no exceptions
Many low-bid installers skip the LADBS permit to keep prices down. That shortcut can void your homeowner's insurance and surface during a home sale. Every LED Guys installation is permitted under NEC Article 625 and signed off by an LADBS inspector.
A real NEC 220 load calculation — free
A 50A Autel charger is one of the largest loads in your home. We calculate your panel's actual headroom before proposing anything, and dial the MaxiCharger's amperage to what your service safely supports — not just the maximum on the box.
The owner does the work
No call center, no subcontractors, no rotating crews. Jorge answers the phone, writes the quote, performs the installation, and walks the inspector through it. One accountable licensed contractor from first call to sign-off.
Commissioning included, not extra
We connect your MaxiCharger to Wi-Fi, update firmware, configure output amperage, set off-peak charging schedules, and confirm a full-speed charge session with your vehicle before we leave. Many installers stop at the breaker.
Panel upgrade in the same project
If your home needs a 200A service upgrade first, we do not hand you off to another contractor. Same crew, one combined permit scope, one inspection, with LADWP service coordination handled for you.
Fixed written pricing, same day
Your quote is written, itemized, and fixed — conduit run, breaker, wire, permit, and labor all priced up front. No change orders, no surprise line items after the drywall is open.
Autel Commercial Charging for Los Angeles Businesses
Beyond the home lineup, Autel builds a full commercial family — the MaxiCharger AC Elite Business, AC Pro, and AC Ultra Level 2 stations, plus DC fast charging units. LED Guys installs commercial Autel charging for properties across Los Angeles, with OCPP-compatible units that work with major charging networks and load management that protects your building's electrical capacity.
Apartments
Give tenants overnight on-site charging — the amenity LA renters with EVs search for first — with RFID or app-controlled access and per-session tracking.
Workplaces
Dual-port Autel commercial units let employees charge during the workday while load management keeps your panel within capacity.
Retail & Hospitality
Customers who charge stay longer. Autel's commercial stations support payment and network integration for revenue-generating charging.
Fleet
Keep electric fleets charged and ready with dedicated, load-managed Autel positions — Level 2 banks or DC fast charging where turnaround matters.
Engineered for multi-unit sites
Commercial installations are engineered differently than a single home charger: load management shares available capacity across stations, conduit runs and subpanels are designed to your site, and service upgrades are scoped where needed.
LED Guys handles the full commercial scope — NEC load calculations, LADBS commercial permits, LADWP service coordination, installation, and commissioning. Call for a commercial site assessment.
Request a Commercial QuoteOur Autel Charger Installation Process — Simple, Permitted & Done Right
Call or Email Jorge
Reach us at (818) 588-7819 or Jorge@ledguyservice.com. Tell us your EV model, which Autel charger you are considering (or already own), and your panel age — we respond fast and schedule your free site visit.
Free Written Quote
Jorge performs a free NEC load calculation, assesses your panel and install location, recommends the right MaxiCharger model and supply option, and delivers a written fixed-price quote on the spot.
Permit Pulled & Install Scheduled
We submit the permit application to LADBS before scheduling your installation day. Work begins only after permit approval. The physical install typically takes 2–4 hours.
Inspection & App Commissioning
We coordinate the LADBS final inspection, then commission your MaxiCharger in the Autel Charge app — Wi-Fi, firmware, amperage, and charging schedules — and confirm a full-speed session with your car.
Not Sure If Your Panel Can Handle a 50A Autel Charger?
Use our free Home Electrical Load Calculator — built to NEC 220 standards — to estimate your current load and find out if your panel has room for a Level 2 charger before you call.
Check My Panel Capacity — Free CalculatorNo sign-up required. Takes about 60 seconds. Built by a licensed C10 electrician.
Electrical Services for Los Angeles & the San Fernando Valley
Electrical Panel Upgrades
100A to 200A upgrades for EV charger readiness, home additions, and code compliance. Electrical Services
EV Charger Installation
Level 1 and Level 2 installations — NEMA 14-50 outlet and hardwired — for all EV brands. EV Charger Info
LED Lighting Installation
Residential and commercial LED retrofit, recessed lighting, and fixture upgrades. Interior Lighting
Commercial LED Retrofits
Energy-efficient LED system conversions for offices, warehouses, and retail spaces. Commercial Lighting
Full Home Rewiring
Complete residential rewiring for older homes, knob-and-tube replacement, and code upgrades. Electrical Services
ADU & Garage Conversion Electrical
Dedicated panel, circuit installation, and EV charger wiring for ADUs and converted garages. Electrical Services
Lutron & Smart Home Lighting
Lutron Caseta, RA2, and smart dimmer systems integrated with your home automation. Interior Lighting
Landscape & Estate Lighting
Low-voltage and line-voltage landscape lighting design and installation for residential estates. Interior Lighting
Recording Studio Electrical
Isolated ground circuits, balanced power, and dedicated studio electrical builds. Studio Electrical
New Construction Electrical
Rough-in, trim-out, and final electrical for new residential and light commercial builds. Electrical Services
Solar & Battery Backup Wiring
Solar panel system wiring, Powerwall integration, and battery backup electrical work. Electrical Services
24/7 Emergency Electrical
Around-the-clock emergency electrical service — no overtime charges, any hour. Call Now
What Los Angeles EV Owners Ask About Autel Chargers
Is Autel a good charger brand compared to ChargePoint or Wallbox?
Yes — at the high-amp tier Autel is one of the strongest values on the market. The MaxiCharger delivers 50A output, OCPP compatibility, ENERGY STAR certification, a 25-foot cable, and a 3-year warranty at a price that typically undercuts ChargePoint Home Flex and Wallbox Pulsar Plus. Jorge installs all major brands and recommends Autel often for multi-car garages and buyers who want maximum speed per dollar.
Will my electrical panel handle a 50A Autel MaxiCharger?
A 50A charger requires a dedicated 60A circuit with headroom left in your panel. Most 200A panels qualify; many pre-1990 Los Angeles homes on 100A service do not. Jorge performs a free NEC Article 220 load calculation during the estimate. If an upgrade is needed, we handle the 200A panel upgrade and Autel installation as one project.
Plug-in NEMA 14-50 or hardwired — which Autel setup is better?
Hardwired unlocks Autel's full 50A output, eliminates plug wear, and is preferred by LADBS inspectors — the right call for long-term homeowners. The 40A plug-in versions on a NEMA 14-50 GFCI outlet make sense for renters or anyone who wants to take the charger when they move. Both are code-compliant and both require a permit.
Can an Autel charger charge my Tesla?
Yes. Autel sells NACS-connector versions of the MaxiCharger that plug directly into Tesla vehicles, and the J1772 versions work with a Tesla-supplied adapter. The hardwired 50A NACS unit is a popular lower-cost alternative to the Wall Connector — and as a Tesla Energy Certified Installer, Jorge can give you an honest comparison of both options during the estimate.
I already bought an Autel charger online. Will you install it?
Absolutely. Customer-supplied Autel units are welcome — many clients buy during Autel sales and have us handle the circuit, permit, mounting, and commissioning. We verify the model, size the circuit to its output, and configure the amperage in the app to match your panel's capacity.
Do I need a permit for an Autel charger in Los Angeles?
Yes. LADBS requires a permit for all dedicated-circuit EV charger installations under NEC Article 625 — including plug-in units, because the 240V outlet itself is new dedicated wiring. LED Guys pulls the permit before work begins and coordinates the final inspection on your behalf.
EV Charger Installations Across Los Angeles & the San Fernando Valley
5.0 Stars — Verified Google Reviews
"I recently hired Jorge to install LED strip lights for my custom cabinets, and I couldn't be happier. Professional, punctual, and incredibly skilled. The wiring was neatly hidden and the setup works seamlessly. Highly recommend for anyone looking for top-notch electrical work."
"Very knowledgeable and punctual. Easy to work with and reasonably priced. I will definitely use them in the future for all my lighting and electrical needs."
"Jorge is the man for any electrical work. He completed lighting installations for my shop and did an excellent job. Professional, efficient, highly satisfied. I highly recommend Jorge for any electrical issues or projects."
"You can't ask for a better electrician than George. He's reliable, communicative, on time, reasonably priced and a pleasure to work with. I've called George for multiple projects, including panel upgrades, recess lighting and even technical issues and he has performed like a champion every time."
"I've worked with many electricians over the years, and he's by far the best. His prices are great, he's always on time, reliable, and gets the job done without any issues. If you need an electrician you can truly count on, reach out to him — you won't be disappointed."
"LED Guys were awesome! They replaced and repaired my open sub panel quickly and made the whole process super easy. Friendly, professional, and explained everything in a way that made sense. Great to have peace of mind knowing the job was done right."
Serving Los Angeles & All of the San Fernando Valley
LED Guys is based in Van Nuys and installs Autel chargers throughout Los Angeles, the Westside, Hollywood, and the entire San Fernando Valley — with fast response times and zero overtime charges for 24/7 calls.
Frequently Asked Questions — Autel Charger Installation in Los Angeles
How much does an Autel MaxiCharger installation cost in Los Angeles?
What panel capacity do I need for the Autel 50A hardwired charger?
What is the permit process for an Autel charger in Los Angeles?
Which Autel model should I choose — AC Lite or AC Elite, 40A or 50A?
Does the Autel MaxiCharger work outdoors in Los Angeles?
Is Autel compatible with my EV — Tesla, Ford, Rivian, Hyundai, BMW?
What warranty and support does an Autel charger come with?
Autel Charger Installation Near Los Angeles
Get a Free Autel Charger Installation Quote in Los Angeles
LED Guys serves Los Angeles and the entire San Fernando Valley with same-day written estimates, LADBS-permitted installations, and no overtime charges — ever. Jorge personally handles every Autel installation from permit application through final inspection and app commissioning. Call or email today to get scheduled.
6641 Kester AveVan Nuys, CA 91405
(818) 588-7819
Jorge@ledguyservice.com
ledguyservice.com
Tesla Certified Installer — Wall Connector & Powerwall